JUAL 859-304 WAGO Relay module; Nominal input voltage: 24 VDC; 1 changeover contact; Red status indicator; Module width: 6 mm; 2,50 mm²; gray
| Nominal input voltage UN | DC 24 V |
| Input voltage range | -15 … +20 % |
| Nominal input current at UN | 10 mA |
| Number of changeover/switchover contacts | 1 |
| Contact material (relay) | AgSnO2 |
| Limiting continuous current | 5 A |
| Inrush current (resistive) max. | (AC) 20 A / 0.02 s |
| Switching voltage (max.) | AC 250 V |
| Switching power (resistive) max. | AC 1250 VA; DC (see load limit curve) |
| Recommended minimum load | 10 V / 10 mA; 24 V / 1 mA |
| Pull-in time (typ.) | 6ms |
| Drop-out time (typ.) | 6ms |
| Bounce time (typ.) | 3.5ms |
| Electrical life (NO; resistive load; 23 °C) | 50 x 10³ switching operations |
| Mechanical life | 5 x 10⁶ switching operations |
| Switching frequency with/without load (max.) | 6 min-1 / 180 min-1 |
| Status indicator | Red LED |
| Rated voltage | 300V |
| Rated surge voltage | 4kV |
| Overvoltage category | III |
| Pollution degree | 2 |
| Dielectric strength (control/load circuit) (AC, 1 min) | 4 kVrms |
| Dielectric strength (open contact) (AC, 1 min) | 1 kVrms |
| Insulation type (control/load circuit) | Reinforced insulation (safe isolation) |
| Insulation type (adjacent devices) | Reinforced insulation (safe isolation) |
| Protection type | IP20 |
| Note on protection type | in connected state or when using 859-525 end plate |
| Connection technology | CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor; with insulated ferrule | 0.08 … 1.5 mm² / 28 … 16 AWG |
| Strip length | 5 … 6 mm / 0.2 … 0.24 inches |
| Width | 6 mm / 0.236 inches |
| Height | 91 mm / 3.583 inches |
| Depth from upper-edge of DIN-rail | 56 mm / 2.205 inches |
| Mounting type | DIN-35 rail |
| Mounting position | Horizontal (standing/lying); vertical |
| Color | gray |
| Fire load | 0.503MJ |
| Weight | 22.9g |
| Ambient temperature (operation at UN) | -40 … 50 °C |
| Surrounding air temperature (storage) | -40 … +70 °C |
| Processing temperature | -25 … +50 °C |
| Temperature range of connection cable per EN 61010-2-201 | ≥ (Tsurrounding air + 20 K) |
| Relative humidity | 5 … 95 % (no condensation permissible) |
| Operating altitude (max.) | 2000m |
| Standards/specifications | EN 61010-2-201 |
| EN 61810-1 | |
| EN 61373 | |
| UL 508 | |
| DNV | |
| Product Group | 6 (Interface Electronics) |
| PU (SPU) | 10 Stück |
| Packaging type | box |
| Country of origin VKOrg Germany | CN |
| GTIN | 4055143606769 |
| Customs tariff number VKOrg Germany | 85364900990 |
Alasan Memilih Kami :
- Barang Original dan Baru
- Ready Stock
- Harga Lebih murah karena dipasok langsung dari sumbernya
- Gedung milik sendiri BUKAN sewa dan BUKAN virtual office sehingga bisa dicek lokasinya
- Nomor telpon kantor fixed lines bukan GSM yang mudah diganti
Untuk informasi produk 859-304 WAGO Relay module
Silahkan hubungi kami :
SUPPLIER SPARE PART MESIN INDUSTRI
Ruko Pondok Cabe Mutiara Blok A-9
Jalan Cabe Raya – Ciputat
Kota Tangerang Selatan 15418
Telepon : 021-749-0079
Telepon : 021-740-2915
WhatsApp : 0812-8110-2690
WhatsApp : 0813-9816-7208
Email : sparepartmesinindustri@gmail.com
Email : ptglohape@gmail.com
https://www.sparepartmesinindustri.com/katalog
https://sparepartmesinindustri.blogspot.com
https://www.sparepartmesinindustri.com/products